Pick & Place File for PCB Assembly
The Pick & Place File / Component Placement List(CPL) is necessary for the proper utilization of pick and place machines. We require Pick & Place data to accurately place the surface mount and through-hole parts on circuit boards. Pick & Place data is the machine file in ASCII text format which comprises reference designator, X/Y locations, rotation, top or bottom side of the board.
The Pick & Place File must contain the information below:
- Designator - Component Reference Designator (e.g. C1, L2, R3)
- Mid X/Mid Y - The X/Y coordinate of the component centroid. Recommended units: Metric(mm).
- Layer - Top / Bottom, the board side where the component should be placed.
- Rotation - The rotation of the component given in degrees. Positive values are counter clockwise.
Recommended File Format: .csv, .xls and .xlsx.
Below is a Sample Pick & Place File.
Download JLC Sample P&P File.
Last updated on Oct 27, 2022
Was this article helpful?