This website requires JavaScript.

How to generate Gerber and Drill files in KiCad 4

How to generate Gerber and Drill files in KiCad 4

Generate Drill and Gerber Files

Select File -> Plot from the menu to open the gerber generation tool.

In general, there are 8x layers you need to have a PCB fabricated:

  • Top Copper (F.Cu)+ Soldermask (F.Mask) + Silkscreen (F.SilkS)

  • Bottom Copper (B.Cu) + Soldermask (B.Mask) + Silkscreen (B.SilkS)

  • Board outline (Edge.Cuts)

  • Drill file

In the Plot window with the Plot format set for Gerber, be sure these Layers are checked:

If you don't know which layers, please check all layers, JLCPCB will help you to use the right layers. Click ‘Plot’ to generate the   files for the layers.

Don't forget to Generate the Drill Files. Click on ‘Generate Drill File’ button. You can use the defaults here as well. Check the "Merge PTH and NPTH holes into one file" box. For now just click ‘Drill File’ or press ‘enter’ to generate the drill file. Use the same output folder as for the gerbers, which should be the default.

Check the Gerber files in GerbView

Next, click ‘Close’to exit the Drill and Plot windows. All of the files should have appeared in your gerbers folder. KiCAD comes with a gerber viewer called GerbView, you can open the “GerbView” and check what your board looks like before sending it to manufacturer.

For more details, please see this video tutorial of generating Gerber files for manufacturing in KiCad.

For Kicad  5.1.9, please check this tutorial.

If everything looks OK, select all of the files, zip them up, and upload the zip file to JLCPCB order page.

Last updated on July 24, 2023